Upload Configuration File/Upload Configuration File To Tftp; Upload Log File/Upload Log File To Tftp - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Figure 11 - 11. Download Firmware to SD Card window (DGS-3200-24)
Use the radio button to select either IPv4 or IPv6. Enter the TFTP Server IP address for the type of IP selected. Specify the
path/file name of the TFTP File. Specify the SD Card File name. Click Download to initiate the file transfer.

Upload Configuration File/Upload Configuration File to TFTP

The Switch can store dual configuration files. The configuration files are indexed as Active, 1, or 2.
Open the Tools drop-down menu on the left-hand side of the menu bar at the top of the Web manager and click Upload
Configuration File to open the following window:
Figure 11 - 12. Upload Configuration File window (DGS-3200-10 and DGS-3200-16)
Figure 11 - 13. Upload Configuration File to TFTP window (DGS-3200-24)
Use the radio button to select either IPv4 or IPv6. Enter the TFTP Server IP address for the type of IP selected. Specify the
path/file name of the TFTP File. Select the desired Configuration ID, Active, 1 or 2. Click Apply to initiate the file transfer.

Upload Log File/Upload Log File to TFTP

A history and attack log can be uploaded from the Switch to a TFTP server.
Open the Tools drop-down menu on the left-hand side of the menu bar at the top of the Web manager and click Upload Log File
to open the following window:
Figure 11 - 14. Upload Log File window (DGS-3200-10 and DGS-3200-16)
275