D-Link xStack Reference Manual page 231

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
The following parameters can be cconfigured:
Parameter Description
Select Profile ID
Use the drop-down menu to select a unique identifier number for this profile set. This value can
(1-5) be set from 1 to 5.
Select ACL Type Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or packet content
mask. This will change the window according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
Select IPv4 to instruct the Switch to examine the IPv4 address in each frame's header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header.
Select Packet Content Mask to specify a mask to examine the content of the packet header.
Source MAC Enter a MAC address mask for the source MAC address.
Mask
Destination MAC
Enter a MAC address mask for the destination MAC address.
Mask
802.1Q VLAN
Selecting this option instructs the Switch to examine the VLAN identifier of each packet header
and use this as the full or partial criterion for forwarding.
802.1p Selecting this option instructs the Switch to specify that the access profile will apply only to
packets with this 802.1p priority value.
Ethernet Type Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
Click Create to implement the changes.
Figure 7 - 24. Add CPU ACL Profile window for Ethernet
217