D-Link xStack Reference Manual page 230

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Figure 7 - 23. CPU Access Profile List window
This window displays the CPU Access Profile List entries created on the Switch (one CPU access profile of each type has been
created for explanatory purposes). To view the configurations for an entry, click the corresponding Show Details button.
To add an entry to the CPU Access Profile List, click the Add CPU ACL Profile button. This will open the Add CPU ACL
Profile window, as shown below. To remove all CPU Access Profile List entries, click the Delete All button.
The Switch supports four CPU Access Profile types: Ethernet (or MAC address-based) profile configuration, IP (IPv4) address-
based profile configuration, IPv6 address-based profile configuration, and Packet Content Mask.
The window shown below is the Add CPU ACL Profile window for Ethernet.
216