Browse Vlan; Layer 2 Protocol Tunneling Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Parameter
VLAN Trunk Global
State
Ports
Click Apply to implement the changes made.

Browse VLAN

This window is used to display the VLAN status.
To view the following window, click L2 Features > VLAN > Browse VLAN:
Enter a VLAN ID in VID field and click Find to display the VLAN status.

Layer 2 Protocol Tunneling Settings

This window is used to configure Layer 2 protocol tunneling settings.
To view the following window, click L2 Features > Layer 2 Protocol Tunneling Settings:
The following parameters can be configured:
Parameter
Layer 2 Protocol
Tunneling State
Description
Use the radio buttons to Enable or Disable the VLAN trunking global state.
The ports to be configured.
Figure 3 - 22. Browse VLAN window
Figure 3 - 23. Layer 2 Protocol Tunneling Settings window
Description
Click to enable or disable the Layer 2 protocol tunneling state.
68