Radius Accounting Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
The following parameters can be configured:
Parameter
Index
IPv4 Address
IPv6 Address
Authentication Port
(1-65535)
Accounting Port (1-
65535)
Timeout (1-255)
Retransmit (1-20)
Key (Max. length 32
bytes)
Confirm Key
Click Apply to implement the changes.

RADIUS Accounting Settings

This window is used to configure the state of the specified RADIUS accounting service.
To view the following window, click Security > RADIUS > RADIUS Accounting Settings:
Figure 6 - 1. Authentication RADIUS Server Settings window
Description
Choose the desired RADIUS server to configure: 1, 2 or 3 and select either IPv4 Address
or IPv6 Address.
Click the radio button and set the RADIUS server IPv4 address.
Click the radio button and set the RADIUS server IPv6 address.
Set the RADIUS authentic server(s) UDP port which is used to transmit RADIUS data
between the Switch and the RADIUS server. The default port is 1812.
Set the RADIUS account server(s) UDP port which is used to transmit RADIUS accounting
statistics between the Switch and the RADIUS server. The default port is 1813.
Set the RADIUS server age-out, in seconds.
Set the RADIUS server retransmit time, in seconds.
Set the key the same as that of the RADIUS server.
Re-type the key which is the same as the above.
128