L3 Features; Ipv4 Static/Default Route Settings; Ipv4 Route Table - D-Link xStack Reference Manual

Web ui reference guide layer 2 managed gigabit ethernet switch
Hide thumbs Also See for xStack:
Table of Contents

Advertisement

®
xStack
DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

L3 Features

IPv4 Static/Default Router Settings

IPv4 Route Table

IPv6 Interface Settings
IPv6 Route Settings
IPv6 Neighbor Settings

IPv4 Static/Default Route Settings

The Switch supports static routing for IPv4 formatted addressing. Users can create up to 512 static route entries for IPv4. For IPv4
static routes, once a static route has been set, the Switch will send an ARP request packet to the next hop router that has been set
by the user. Once an ARP response has been retrieved by the switch from that next hop, the route becomes enabled. However, if
the ARP entry already exists, an ARP request will not be sent.
The Switch also supports a floating static route, which means that the user may create an alternative static route to a different next
hop. This secondary next hop device route is considered as a backup static route for when the primary static route is down. If the
primary route is lost, the backup route will uplink and its status will become Active.
Entries into the Switch's forwarding table can be made using both an IP address subnet mask and a gateway.
To view the following window, click L3 Features > IPv4 Static/Default Route Settings:
The following parameters can be configured:
Parameter
Gateway
This field allows the entry of a Gateway IP Address to be applied to the corresponding gateway
of the IP address.
Metric (1-65535)
Represents the metric value of the IP interface entered into the table. This field may read a
number between 1 and 65535.
Click Apply to implement the changes made. Click Delete to remove the specific entry.
IPv4 Route Table
The IP routing table stores all the external routes information of the switch. This window displays all the external route
information on the Switch.
To view the following window, click L3 Features > IPv4 Route Table:
Figure 4 - 1. IPv4 Route Settings Window
Description
115
Section 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3200 series

Table of Contents