Table of Contents
Advertisement
Connecting peripheral devices to the 201i server
What is next?
Continue with
Completing the installation
Introduction
To complete the installation of the 201i server, lock the 201i into position. The server starts up
automatically.
Important:
When connecting the optional Avaya server subnet, do not power up unless your antivirus
programs and Avaya security updates are installed first.
To complete the installation and start the 201i server
Note:
Ensure that the switch in which the 201i is installed is powered on.
1. Ensure that all peripheral devices are powered up (including the 201i shelf).
2. Push the 201i server gently but firmly until it is flush with the backplane.
3. Close the lock latches to secure the 201i server to the backplane.
4. Ensure that the power status LED is lit.
5. Watch the HEX display on the 201i server.
®
126
Avaya CallPilot
Completing the installation
Result: The 201i server beeps for three seconds to indicate that power is being
received.
The HEX display shows T:01 through T:08, and then HOST. This takes about 13
seconds.
201i Server Hardware Installation
on page 126.
December 2010
Advertisement
Table of Contents
