Logging In To The P330 Stack Processor With Device Manager; About Avaya Site Administration; Configuring Avaya Site Administration - Avaya G700 Installation Manual

2. Choose Call - Connect (for HyperTerminal) or the appropriate call command for your
terminal emulation program.
3. Login at the Welcome to Avaya P330 screen.
Login: xxx from the planning documentation
Password: xxx from the planning documentation
You are now logged-in at the Supervisor level. The prompt appears as P330-1(super)#.

Logging in to the P330 Stack Processor with Device Manager

To access the Device Manager, you must have access to the corporate LAN in which the P330
Stack Processor resides.
To access Device Manager, do the following:
1. Open a compatible Internet browser on your computer.
Currently this includes Internet Explorer 5.0 (or higher) and Netscape Navigator 4.7 and 6.2.
The Java Plug-in 1.2.2 or 1.3.1 is required.
2. In the Address (or Location) field of your browser, type the IP address or name of the
P330 Stack Processor and press Enter.
If the network includes a domain name service (DNS) server that has been administered
with this IP device's name, you can type the processor's name into the address field instead
of the IP address. For example, http://P330-stack1.mycompany.com
Note:
The Device Manager is not available through the S8300 Media Server. You must
Note:
be connected to either the P330 Stack Processor or G700 Media Gateway
processor through the corporate LAN.
A GUI rendering of the stack devices appears.
3. Proceed with Media Gateway or stack device administration.

About Avaya Site Administration

A single license for Avaya Site Administration is included with the Standard Integrated
Management package.

Configuring Avaya Site Administration

When Avaya Site Administration is initially installed on a client machine, it needs to be
configured to communicate with Communication Manager on the S8300 Media Server.
About Connection and Login Methods
Issue 7 January 2005 65