Specifying Whether To Reset The Destination And Settings (Reset Data After Job); Setting Reset Data After Job - Konica Minolta bizhub C550 User Manual

Utility mode
10.11 Specifying whether to reset the destination and set-
tings (Reset Data After Job)
Select whether the settings are reset to their defaults or whether they remain
for the next fax.
Reset Data After Job: Reset All*/Reset Destination Only /Confirm with User
- Reset Destination Only: Select this setting to retain the settings and reset
only the destination.
- Confirm with User: Select this setting to display a confirmation message
asking whether or not to reset the settings and destination.
* is a default value at the time of procurement.

Setting Reset Data After Job

1
Display the Administrator Settings screen as described in "Displaying
Administrator Settings screen" on page 10-4.
2
Touch [System Settings].
– Some items may not be displayed, depending on the specified op-
tion settings.
– In Utility mode, items can also be selected by pressing the key in
the keypad for the number beside the desired button. For "System
Settings", press the [1] key in the keypad.
C550
10
10-38