To Replace The Staple Cartridge For Finisher Fs-510 - Konica Minolta bizhub 500 User Manual

10
11
Close the finisher right side door, then slide the finisher to the right to
return it to its original position.

To replace the staple cartridge for Finisher FS-510

0 Be sure to replace the staple cartridge after displaying the message, oth-
erwise the machine may be dameged.
0 When replacing the staple cartridge, touch [Add Staples] to move the sta-
pler toward the finisher front door. If necessary, turn the stapler moving
knob to bring the stapler forward.
1
Touch [Finishing] on the Basic Screen.
The Finishing Screen will be displayed. The [Add Staples] key will ap-
pear on the Finishing Screen.
10-14
Supplies & Handling
bizhub 500/420