Precautions For Paper; Paper Storage; Auto Tray Switch Function - Konica Minolta BIZHUB 501 Copy Operations

7
7.1.7

Precautions for paper

Do not use the following types of paper.
Otherwise, decreased print quality, paper misfeeds or damage may result.
- OHP transparencies that have already been fed through the machine (even if the transparency is still
blank)
- Paper that has been printed on with a heat-transfer printer or an inkjet printer
- Paper that is either extremely thick or extremely thin
- Folded, curled, wrinkled, or torn paper
- Paper that has been left unwrapped for a long period of time
- Damp paper, perforated paper, or paper with punched holes
- Extremely smooth or extremely rough paper, or paper with an uneven surface
- Paper that has been treated, such as carbon-backed, heat-sensitive or pressure-sensitive paper
- Paper that has been decorated with foil or embossing
- Paper of a non-standard shape (not rectangular)
- Paper that is bound with glue, staples or paper clips
- Paper with labels attached
- Paper with ribbons, hooks, buttons, etc., attached
7.1.8

Paper storage

Store paper in a cool, dark location with little humidity.
If the paper becomes damp, paper misfeeds may occur.
Paper that has not been loaded should be kept wrapped or placed in a plastic bag and stored in a cool, dark
location with little humidity.
Store the paper laying flat, not standing on its edge. Curled paper may cause paper misfeeds.
Keep paper out of the reach of children.
7.1.9

Auto Tray Switch Function

If the selected paper tray runs out of paper while a job is being printed and a different paper tray is loaded
with paper meeting the following conditions, the other paper tray is automatically selected so printing can
continue. If the optional large capacity unit LU-203 is installed, a maximum of 5,650 copies can be made
continuously. (The paper tray is automatically switched only if the "ATS Permission parameter" in the Utility
mode is set to "Permit".)
Operating Conditions (Set the following condition at "1 System Setting>3 Paper Tray Setting" of User
Setting.)
- Select the paper trays to be selected automatically by "Auto Tray Select Setting", if Auto paper select
is functioned.
Tray Priority is available.
- Select "Allow" at "Auto Tray Switch ON/OFF"
- Select the same paper type at "Paper Type".
Load the following paper into the paper trays.
- The same size in the same orientation.
- The same paper type.
7-10
Copy paper/originals
bizhub 501/421/361 (Version 2)