Stopping Copying; To Stop/Restart/Delete A Copy Job - Konica Minolta Di2510 User Manual

4
4.2

Stopping Copying

Follow the procedure described below to cancel a copy job.

To stop/restart/delete a copy job

1
Press the [Stop] key while the job
is being printed.
Copying stops.
2
The message "Copy cycle
temporarily suspended." appears.
3
To restart a job that has been
stopped, press the [Start] key.
Copying continues.
4
To delete the stopped copy job,
select the button for the job that
you wish to delete.
The job is deleted.
4-4
4.2 Stopping Copying
Di2510/Di3010/Di3510