General Copy Operation - Konica Minolta bizhub 601 User Manual

Basic copy operations
2 Basic copy operations
2.1

General copy operation

This section contains information on the general operation for making copies.
The following procedure describes how to copy a single-sided original using basic copy operations.
Note
The maximum loading capacity of the output trays for the optional finisher may be limited depending
on the paper size and selected Finishing settings.
With continuous printing (multiple jobs), the warning "The output tray has reached its capacity. Remove
paper from the tray indicated by
For details on multiple jobs, refer to
Interrupting a print job resets the loading capacity of the output tray.
For details on the limitations of the loading capacity for the output trays, refer to
page 5-2.
Some settings cannot be used together. For details on the settings that cannot be combined, refer to
"Operations that cannot be combined" on page
1
Press the [Copy] key to display the Basic screen in Copy mode.
2
Position the original to be copied.
– For details on positioning the original, refer to
3
Specify the desired copy settings.
751/601
→
." may appear, even if the paper was removed from the output trays.
"Multi-job feature" on page
2-4.
page 2-6.
10-2.
"Specifications" on
2
2-2