Specifying The Settings; Specifying Settings Concerning Transmission If The Memory Becomes Full (Mode 025); Factory Settings; Specifying The Maximum Number Of Copies Allowed With Remote Copying (Mode 028) - Konica Minolta bizhub C200 Network Administration Manual

3
3.5.8

Specifying settings concerning transmission if the memory becomes full (mode 025)

Specify whether or not to send the transmission if the memory of this machine became full while scanning
the original.

Factory settings

Factory settings
Bits
Settings

Specifying the settings

During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7-6 Specify whether or not to send the transmission if the mem-
ory of this machine became full while scanning the original.
5-0 -
3.5.9

Specifying the maximum number of copies allowed with remote copying (mode 028)

Specify the maximum number of copies allowed when a document specified for remote copying is received.
Factory settings
Factory settings
Bits
Settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7 -
6-0 Specify the maximum number of copies when a remote copy
document is received.
3-22
Specifying machine functions (software switch settings)
7654 3210
0100 0000 (HEX: 40)
7654 3210
0110 0011 (HEX: 63)
Settings Details
00 Delete
01 Inquire (deleted if there is no
response to the inquiry or if
the "Quick Scan TX" func-
tion was used)
10 Inquire (sent if there is no re-
sponse to the inquiry or if
the "Quick Scan TX" func-
tion was used)
11 *Do not specify these set-
tings.
000000 *Do not change the settings
for these bits.
Settings Details
0 *Do not change the setting
for this bit.
0000001 1 set
0000010 2 sets
0000011 3 sets
0000100 4 sets
.
.
.
1100011 99 sets
Others *Do not specify any settings
other than those mentioned
above.
bizhub C200