CHAPTER 10
Connecting the ACX1000 or ACX1100
Router to Management Devices
Connecting ACX1000 or ACX1100 Routers to Management Devices
Connecting the Router to a Network for Out-of-Band Management
Copyright © 2013, Juniper Networks, Inc.
Connecting ACX1000 or ACX1100 Routers to Management Devices on page 47
To connect external devices and cables to the router, you need the following tools:
Shielded RJ-45 Ethernet cable (not provided)
RJ-45 to DB-9 serial port adapter (provided)
Management host, such as a PC, with an Ethernet port (not provided)
Connecting the Router to a Network for Out-of-Band Management on page 47
Connecting the Router to a Management Console or Auxiliary Device on page 48
To connect to the
port on the ACX1000 or ACX1100 router:
MGMT
Turn off the power to the management device.
1.
Plug one end of the Ethernet cable into the
2.
page 47
shows the connector.
Plug the other end of the cable into the network device.
3.
Figure 22: Ethernet Cable Connector
Figure 23: Ethernet Port
CONSOLE/AUX
port
port on the router.
MGMT
Figure 23 on page 47
Console Server
(Figure 22 on
shows the port.)
PC
47