Safety Guidelines And Warnings; General Safety Guidelines For Juniper Networks Devices - Juniper ACX1000 Hardware Manual

Safety Guidelines and Warnings

General Safety Guidelines for Juniper Networks Devices

Copyright © 2013, Juniper Networks, Inc.
Appendix A: Safety and Regulatory Compliance Information for the ACX1000 and ACX1100 Router
DC Power Electrical Safety Warnings for Juniper Networks Devices on page 105
General Safety Guidelines for Juniper Networks Devices on page 79
General Safety Warnings for Juniper Networks Devices on page 80
Preventing Electrostatic Discharge Damage to an ACX1000 or ACX1100
Router on page 82
Fire Safety Requirements for Juniper Networks Devices on page 83
Installation Safety Warnings for Juniper Networks Devices on page 84
ACX1000 and ACX1100 Chassis Lifting Guidelines on page 89
General Laser Safety Guidelines for Juniper Networks Devices on page 90
Laser Safety Warnings for Juniper Networks Devices on page 90
Maintenance and Operational Safety Warnings for Juniper Networks Devices on page 93
General Electrical Safety Guidelines and Warnings on page 98
The following guidelines help ensure your safety and protect the hardware equipment
from damage. The list of guidelines might not address all potentially hazardous situations
in your working environment, so be alert and exercise good judgment at all times.
Perform only the procedures explicitly described in this documentation. Make sure that
only authorized service personnel perform other system services.
Keep the area around the chassis clear and free from dust before, during, and after
installation.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
become caught in the chassis.
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
Operate the hardware equipment only when the chassis is properly grounded.
Do not open or remove chassis covers or sheet metal parts unless instructions are
provided in this documentation. Such an action could cause severe electrical shock.
79