Unpacking An Acx1000 Or Acx1100 Router - Juniper ACX1000 Hardware Manual

ACX1000 and ACX1100 Universal Access Router Hardware Guide
Related
Documentation

Unpacking an ACX1000 or ACX1100 Router

34
Table 18: Parts List for an ACX1000 and ACX1100 Router (continued)
Component
Quick Start installation instructions
Juniper Networks Product Warranty
End User License Agreement
NOTE: You must provide additional mounting screws if needed that are
appropriate for your rack or cabinet to mount the chassis on a rack or a
cabinet.
ACX1000 and ACX1100 Universal Access Router Overview on page 3
Unpacking an ACX1000 or ACX1100 Router on page 34
The ACX1000 and ACX1100 routers are shipped in a cardboard carton, secured with foam
packing material. The carton also contains an accessory box.
CAUTION: ACX1000 and ACX1100 routers are maximally protected inside
the shipping carton. Do not unpack the routers until you are ready to begin
installation.
To unpack the router and prepare for installation, you need the following tools:
Blank panels to cover any slots not occupied by a component
To unpack the router:
Move the shipping carton to a staging area as close to the installation site as possible,
1.
but where you have enough room to remove the system components.
Position the carton so that the arrows are pointing up.
2.
Open the top flaps on the shipping carton.
3.
Remove the accessory box, and verify the contents in it against the parts inventory
4.
on the label attached to the carton.
Pull out the packing material holding the router in place.
5.
Quantity
1
1
1
Copyright © 2013, Juniper Networks, Inc.