Juniper ACX1000 Hardware Manual page 66

ACX1000 and ACX1100 Universal Access Router Hardware Guide
50
This procedure connects the router to the network but does not enable it to forward
traffic. For complete information about enabling the router to forward traffic, including
examples, see the Junos OS configuration guides.
To configure the software:
Verify that the router is powered on.
1.
Log in as the "root" user. There is no password.
2.
Start the CLI.
3.
root# cli
root@>
Enter configuration mode.
4.
cli> configure
[edit]
root@#
Configure the name of the router. If the name includes spaces, enclose the name in
5.
quotation marks (" ").
[edit]
root@# set system host-name host-name
Create a management console user account.
6.
[edit]
root@# set system login user user-name authentication plain-text-password
New password: password
Retype new password: password
Set the user account class to
7.
[edit]
root@# set system login user user-name class super-user
Configure the router's domain name.
8.
[edit]
root@# set system domain-name domain-name
Configure the IP address and prefix length for the router's Ethernet interface.
9.
[edit]
root@# set interfaces fxp0 unit 0 family inet address address/prefix-length
Configure the IP address of a backup router, which is used only while the routing
10.
protocol is not running.
[edit]
root@# set system backup-router address
Configure the IP address of a DNS server.
11.
[edit]
root@# set system name-server address
Set the root authentication password by entering either a clear-text password, an
12.
encrypted password, or an SSH public key string (DSA or RSA).
super-user .
Copyright © 2013, Juniper Networks, Inc.