In Case Of An Electrical Accident; Acx1100 Ac Power Electrical Safety Guidelines And Warnings - Juniper ACX1000 Hardware Manual

Universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

Related
Documentation
Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
Appendix A: Safety and Regulatory Compliance Information for the ACX1000 and ACX1100 Router
In Case of an Electrical Accident on page 103

In Case of an Electrical Accident

If an electrical accident results in an injury, take the following actions in this order:
Use caution. Be aware of potentially hazardous conditions that could cause further
1.
injury.
Disconnect power from the router.
2.
If possible, send another person to get medical aid. Otherwise, assess the condition
3.
of the victim, then call for help.
General Safety Warnings for Juniper Networks Devices on page 80
General Electrical Safety Warnings for Juniper Networks Devices on page 98

ACX1100 AC Power Electrical Safety Guidelines and Warnings

The following electrical safety guidelines apply to an AC-powered router:
You can order three-wire electrical cords with a grounding-type plug that fits only a
grounding-type power outlet. Do not circumvent this safety feature. Equipment
grounding should comply with local and national electrical codes.
Each AC power supply has one AC appliance inlet. Each inlet requires a dedicated AC
power feed and a dedicated customer site circuit breaker. We recommend that you
use a dedicated circuit breaker rated at 2 A (100 VAC) or 1 A (240 VAC), or as required
by local code.
WARNING:
The router is pluggable type A equipment installed in a
restricted-access location.
The power cord serves as the main disconnecting device for the AC-powered device.
The socket outlet must be near the AC-powered device and be easily accessible.
The cores in the main lead are colored in accordance with the following code:
Green and yellow—Earth
Blue—Neutral
Brown—Live
When a router is equipped with two AC power supplies, both power cords (one for
each power supply) must be unplugged to completely disconnect power to the router.
WARNING:
The attached power cable is only for this product. Do not use the
cable for another product. Japanese translation:
103

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx1100

Table of Contents