Packing The Acx Series Router For Shipment - Juniper ACX1000 Hardware Manual

ACX1000 and ACX1100 Universal Access Router Hardware Guide

Packing the ACX Series Router for Shipment

Related
Documentation
140
To pack the router for shipment:
Retrieve the shipping box and packing materials in which the router was originally
1.
shipped. If you do not have these materials, contact your Juniper Networks
representative about approved packaging materials.
On the console or other management device connected to the Routing Engine, enter
2.
CLI operational mode and issue the following command to shut down the router
software.
user@host> request system halt
Wait until a message appears on the console confirming that the operating system
has halted.
For more information about the command, see the Junos OS Operational Mode
Commands.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
3.
the strap to one of the ESD points on the chassis.
Shut down power to the router by pressing the AC input switch or DC circuit breaker
4.
for all power supplies to the off (
Disconnect power from the router.
5.
Remove the cables that connect to all external devices.
6.
Remove all field replaceable units (FRUs) from the router.
7.
Remove the router from the rack. One person should grasp the router while a second
8.
person unscrews and removes the mounting screws from the rack. One lifter can then
move the router to the shipping container.
Place the router in the shipping container.
9.
Cover the router with an ESD bag and place the packing foam on top of and around
10.
the router.
Replace the accessory box on top of the packing foam.
11.
Securely tape the box closed.
12.
Write the RMA number on the exterior of the box to ensure proper tracking.
13.
Returning a Hardware Component to Juniper Networks, Inc. on page 139
Contacting Customer Support on page 138
O ) position.
Copyright © 2013, Juniper Networks, Inc.