ACX1000 and ACX1100 Universal Access Router Hardware Guide
ACX1000 Router Description
ACX1100 Router Description
4
The chassis is a rigid sheet metal structure that houses all the other router components.
The chassis measures 1.75 in. (4.45 cm) high, 9.4 in. (24 cm) deep, and 17.5 in. (44.5 cm)
wide. The outer edges of the mounting brackets extend the width to 19 in. (48 cm) (from
the front-mounting brackets to the rear of the chassis). The chassis installs in standard
300-mm deep (or larger) enclosed cabinets, 19-in. equipment racks, or telco open-frame
racks.
The ACX1000 routers contain eight T1/E1 ports and twelve Gigabit Ethernet ports, eight
of which are RJ-45 ports. The ports labeled
RJ-45 ports or four Gigabit Ethernet SFP ports. You can use only one set of combination
ports at a time.
Figure 1 on page 4
and
Figure 2 on page 4
router.
Figure 1: Front View of the ACX1000 Router
Figure 2: Rear View of the ACX1000 Router
The ACX1100 routers contain twelve Gigabit Ethernet ports, eight of which are RJ-45
ports. The ports labeled
COMBO PORTS
Gigabit Ethernet SFP ports. You can only use one set of combination ports at a time.
Figure 3 on page 4
and
Figure 4 on page 5
router.
Figure 3: Front View of the ACX1100 Router
provide an additional four
COMBO PORTS
show the front and rear views of the ACX1000
provide an additional four RJ-45 ports or four
show the front and rear views of the ACX1100
Copyright © 2013, Juniper Networks, Inc.