Acx1100 Routers Hardware And Cli Terminology Mapping; Figure 5: Acx1000 Interface Port Mapping; Table 4: Cli Equivalents Of Terms Used In Documentation For Acx1100; Routers - Juniper ACX1000 Hardware Manual

ACX1000 and ACX1100 Universal Access Router Hardware Guide
Table 3: CLI Equivalents of Terms Used in Documentation for ACX1000 Routers (continued)
Hardware
Item (as
displayed Description (as
in the CLI) displayed in the CLI)
One of the following:
4x 1GE (RJ-45)
4x 1GE (SFP)
Xcvr (n) Abbreviated name of
the transceiver
Power Built-in power supply
supply (n)
Fan Fan
NOTE: ACX1000
routers are fanless
models.

ACX1100 Routers Hardware and CLI Terminology Mapping

Table 4: CLI Equivalents of Terms Used in Documentation for ACX1100 Routers
Hardware
Item (as
displayed Description (as
in the CLI) displayed in the CLI)
Chassis ACX1100
6
Value (as
displayed in the
CLI)
PIC 2
n is a value
equivalent to the
number of the
port in which the
transceiver is
installed.
Value of n is
always 0.
–

Figure 5: ACX1000 Interface Port Mapping

ACX1000
MGMT
ALARM
CONSOLE/AUX
SYS 0
Table 4 on page 6 describes the hardware terms used in ACX1100 router documentation
and the corresponding terms used in the Junos OS command line interface (CLI).
6 on page 7 shows the port locations of the interfaces.
Value (as
displayed in the
CLI)
–
Item in Documentation
Built-in uplink ports on the
front panel of the router
Optical transceivers
DC power supply
Fan
FPC 0, PIC 0
T1/E1 0/0/0-0/0/7
T1/E1 GE
0/0/5 0/0/6 0/0/7 0/1/5 0/1/6
0/0/4 0/1/4
1PPS 10MHz
IN OUT IN OUT
0/0/0 0/0/1 0/0/2 0/0/3 0/1/0 0/1/1 0/1/2
FPC 0, PIC 1
GE 0/1/0-0/1/7
Item in Documentation
Router chassis
Additional Information
"ACX1000 and ACX1100 Universal
Access Router Overview" on
page 3
"Uplink Ports on ACX1000 and
ACX1100 Routers" on page 14
"ACX1000 and ACX1100 Power
Overview" on page 17
"Cooling System and Airflow in an
ACX1000 and ACX1100 Router" on
page 16
FPC 0, PIC 2
GE 0/2/0-0/2/3
GE COMBO
0/1/7 0/2/2 (Cu) 0/2/3 (Cu)
GE COMBO
0/1/3 0/2/0 (Cu) 0/2/1 (Cu)
0/2/0 (SFP) 0/2/1 (SFP) 0/2/2 (SFP) 0/2/3 (SFP)
FPC 0, PIC 2
GE 0/2/0-0/2/3
Additional Information
"Chassis Physical Specifications
for ACX1000 and ACX1100
Routers" on page 117
Copyright © 2013, Juniper Networks, Inc.
Figure