General Electrical Safety Guidelines And Electrical Codes For Juniper Networks Devices - Juniper ACX1000 Hardware Manual

ACX1000 and ACX1100 Universal Access Router Hardware Guide
Related
Documentation
102
vekselstrømsenheter og strømmen kobles fra ved strømbryteren på
likestrømsenheter.
Aviso Antes de trabalhar num chassis, ou antes de trabalhar perto de unidades
de fornecimento de energia, desligue o cabo de alimentação nas unidades
de corrente alternada; desligue a corrente no disjuntor nas unidades de
corrente contínua.
¡Atención! Antes de manipular el chasis de un equipo o trabajar cerca de una
fuente de alimentación, desenchufar el cable de alimentación en los equipos
de corriente alterna (CA); cortar la alimentación desde el interruptor
automático en los equipos de corriente continua (CC).
Varning! Innan du arbetar med ett chassi eller nära strömförsörjningsenheter
skall du för växelströmsenheter dra ur nätsladden och för likströmsenheter
bryta strömmen vid överspänningsskyddet.
DC Power Electrical Safety Warnings for Juniper Networks Devices on page 105
General Electrical Safety Guidelines and Electrical Codes for Juniper Networks
Devices
Install the router in compliance with the following local, national, or international
electrical codes:
United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code.
Canada—Canadian Electrical Code, Part 1, CSA C22.1.
Other countries—International Electromechanical Commission (IEC) 60364, Part 1
through Part 7.
Locate the emergency power-off switch for the room in which you are working so that
if an electrical accident occurs, you can quickly turn off the power.
Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
Never assume that power is disconnected from a circuit. Always check the circuit before
starting to work.
Carefully look for possible hazards in your work area, such as moist floors, ungrounded
power extension cords, and missing safety grounds.
Operate the router within marked electrical ratings and product usage instructions.
For the router and peripheral equipment to function safely and correctly, use the cables
and connectors specified for the attached peripheral equipment, and make certain
they are in good condition.
Many router components can be removed and replaced without powering off or
disconnecting power to the router. Never install equipment if it appears damaged.
Copyright © 2013, Juniper Networks, Inc.