Juniper ACX1000 Hardware Manual page 71

Copyright © 2013, Juniper Networks, Inc.
Chapter 12: Connecting the ACX1000 or ACX1100 Router to External Alarm and Clocking Devices
Configure the port. See:
5.
Initially Configuring the ACX1000 or ACX1100 Router on page 49
Configuring External Clock Synchronization for ACX Series Routers
Issue the show chassis synchronization
6.
user@host> show chassis synchronization
Clock Synchronization Status :
Clock module on CB 0
Current state
Current clock state
Selected for
Selected since
Deviation (in ppm)
Last deviation (in ppm): +0.00
Clock Synchronization Status :
Clock module on CB 1
Current state
Current clock state
Selected for
Selected since
command to check the status of the port.
: master
: internal
: 13 days, 23 hours, 15 minutes, 17 seconds
: 2012-10-29 18:28:35 EDT
: +0.00
: backup
: locked to master CB
: 13 days, 23 hours, 14 minutes, 23 seconds
: 2012-10-29 18:29:29 EDT
55