CHAPTER 14
Unpacking the Router
Unpacking an ACX1000 or ACX1100 Router
Copyright © 2017, Juniper Networks, Inc.
Unpacking an ACX1000 or ACX1100 Router on page 81
Parts Inventory (Packing List) for an ACX1000 and ACX1100 Router on page 82
The ACX1000 and ACX1100 routers are shipped in a cardboard carton, secured with foam
packing material. The carton also contains an accessory box.
CAUTION:
ACX1000 and ACX1100 routers are maximally protected inside
the shipping carton. Do not unpack the routers until you are ready to begin
installation.
To unpack the router and prepare for installation, you need the following tools:
Blank panels to cover any slots not occupied by a component
To unpack the router:
Move the shipping carton to a staging area as close to the installation site as possible,
1.
but where you have enough room to remove the system components.
Position the carton so that the arrows are pointing up.
2.
Open the top flaps on the shipping carton.
3.
Remove the accessory box, and verify the contents in it against the parts inventory
4.
on the label attached to the carton.
Pull out the packing material holding the router in place.
5.
81