Configuring Fax Initial Settings; Setting Your Region; Setting The Printer Id - Fuji Xerox DocuPrint M255 z User Manual

Configuring Fax Initial Settings

This section includes:
• "Setting Your Region" on page 246
• "Setting the Printer ID" on page 246
• "Setting the Time and Date" on page 247
• "Changing the Clock Mode" on page 248

Setting Your Region

You need to set the region where your printer is used for using the fax service on the printer.
1
Press the (System) button.
2
Select Admin Menu, and then press the
3
Select Fax Settings, and then press the
4
Select Region, and then press the
5
Select the locale of the printer, and then press the
6
When the LCD panel shows Restart System, select Yes, and then press the
The printer restarts to apply the setting.
NOTE:
• Changing the Region setting initializes all the information specified for your printer.

Setting the Printer ID

You may be required to indicate your fax number on any fax you send. The printer ID, containing your
fax number and your name or company name will be printed at the top of each page sent from your
printer.
1
Press the (System) button.
2
Select Admin Menu, and then press the
3
Select Fax Settings, and then press the
4
Select Your Fax Number, and then press the
5
Enter your fax number using the numeric keypad.
NOTE:
• If you make a mistake while entering numbers, press the
6
Confirm the number on the LCD panel is correct, and then press the
7
Select Company Name, and then press the
246 Faxing
button.
button.
button.
button.
button.
button.
button.
C
(Clear) button to delete the last digit.
button.
button.
button.