6
Configure the security setting, and then click Next.
The IP Address Settings screen appears.
7
Select IP Mode depending on your network scheme.
When IPv4 is selected, configure the following:
Select Type.
a
If you have selected Use Manual Address from Type, enter the following items:
b
•
IP Address of your printer
•
Subnet Mask
•
Gateway Address
When Dual Stack is selected, configure the following:
Configure IPv4 Settings.
a
If you have selected the Use Manual Address check box under IPv6 Settings, enter the
b
following items:
•
IP Address of your printer
•
Gateway Address
Printer Connection and Software Installation
87