Fax Defaults - Fuji Xerox DocuPrint M255 z User Manual

Fax Defaults

Use the Fax Defaults menus to configure a variety of fax features.
NOTE:
• The Fax service cannot be used unless you specify your region under Region. If Region is set to Unknown,
the message Set The Region Code appears on the LCD panel.
• Resolution
Purpose:
To specify the resolution level to be used for fax transmission.
Values:
Standard*
Fine
SuperFine(203dpi)
SuperFine(406dpi)
* Factory default menu setting
NOTE:
• Faxes scanned in the SuperFine(203dpi) mode are received at the highest resolution of the remote machine.
• Document Type
Purpose:
To specify the default document type.
Values:
Text*
Photo
* Factory default menu setting
• Lighten/Darken
Purpose:
To specify the default fax density level.
Values:
Lighten2
Lighten1
Normal*
Darken1
Darken2
* Factory default menu setting
326 Using the Operator Panel Menus and Keypad
Suitable for documents with normal sized characters.
Suitable for documents containing small characters or thin lines or
documents printed with a dot-matrix printer.
Suitable for documents containing extremely fine details. The
SuperFine(203dpi) mode is effective only when the remote tax
machine supports the super fine resolution. See the notes below.
Suitable for documents containing photographic images.
Suitable for documents with text.
Suitable for documents with photos.
Makes the fax lighter than the source document. Works well with dark
print.
Works well with standard typewritten or printed documents.
Makes the fax darker than the source document. Works well with light
print or faint pencil markings.