Margin Middle - Fuji Xerox DocuPrint M255 z User Manual

Margin Middle

You can specify the middle margin of the copy.
1
Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going
in first; or place a single document face down on the document glass and close the document
cover.
See also:
• "Making Copies From the Automatic Document Feeder (ADF)" on page 186
• "Making Copies From the Document Glass" on page 184
2
Press the (Copy) button.
3
Select Margin Middle, and then press the
4
Press the or
the button.
0 mm*/0.0 inch*
0-50 mm/0.0-2.0 inch
* Factory default menu setting
5
If necessary, customize other copy options including the number of copies, copy size, and image
quality.
See also:
• "Customizing Copy Options" on page 187
6
Press the (Start) button to begin copying.
204 Copying
button or enter the desired value using the numeric keypad, and then press
Specify the value in increments of 1 mm/0.1 inch. Which factory
default menu setting displays depends on the value selected for mm /
inch under the System Settings menu. See
page 309
button.
for more information.
"mm / inch" on