Fuji Xerox DocuPrint M255 z User Manual page 320

• 2-Sided
Purpose:
To specify whether to print on either sides of paper.
Values:
1->1-Sided*
Flip on Long Edge
Flip on Short Edge
* Factory default menu setting
• N-Up
Purpose:
To print two original pages to fit onto one sheet of paper.
Values:
Off*
Auto
ID Card Copy
Manual
* Factory default menu setting
• Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
4 mm*/0.2 inch*
0-50 mm/0.0-2.0 inch
* Factory default menu setting
• Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
4 mm*/0.2 inch*
0-50 mm/0.0-2.0 inch
* Factory default menu setting
320 Using the Operator Panel Menus and Keypad
Makes regular single-sided copies.
Makes duplex (2-sided) copies ready to be bound on the long edge.
Makes duplex (2-sided) copies ready to be bound on the short edge.
Makes regular one-to-one copies of the source documents.
Automatically reduces the size of the source documents to print all of
them on a single sheet of paper.
Prints both sides of the ID card on a single sheet of paper in the
original size.
Reduces the size of the source documents according to the
Reduce/Enlarge setting and print all of them on a single sheet of
paper.
Specify the value in increments of 1 mm/0.1 inch. Which factory
default menu setting displays depends on the value selected for mm /
inch under the System Settings menu. See
page 309 for more information.
Specify the value in increments of 1 mm/0.1 inch. Which factory
default menu setting displays depends on the value selected for mm /
inch under the System Settings menu. See
page 309 for more information.
"mm / inch" on
"mm / inch" on