• Line Monitor
Purpose:
To specify the volume of the sound that the printer emits from the internal speaker while establishing a
connection for fax transmission.
Values:
Off
Min
Middle*
Max
*
Factory default menu setting
• Ring Tone Volume
Purpose:
To specify the volume of the ring tone that the printer emits from the internal speaker to indicate an
incoming telephone call while in the TEL/FAX Mode.
Values:
Off
Min
Middle
Max*
*
Factory default menu setting
• Line Type
Purpose:
To specify the line type.
Values:
PSTN*
PBX
*
Factory default menu setting
• Dialing Type
Purpose:
To specify the dialing type.
Values:
Tone*
DP (10pps)
*
Factory default menu setting
NOTE:
•
DP (10pps) is not displayed when Australia is set for Region.
Turns off the line monitor.
Sets the volume of the line monitor.
Turns off the ring tone.
Sets the volume of the ring tone.
Sets the line type to PSTN.
Sets the line type to PBX.
Uses the touch-tone dialing system.
Uses the pulse dialing system (10 pulses per second).
Using the Operator Panel Menus and Keypad
299