Sending An E-Mail With The Scanned File - Fuji Xerox DocuPrint M255 z User Manual

Sending an E-mail With the Scanned File

NOTE:
• To use the Scan to E-Mail feature, you first need to set up your SMTP (Simple Mail Transfer Protocol) server
information. SMTP is a protocol for sending e-mail. For more information, refer to the Setup Guide.
1
Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going
in first; or place a single document face down on the document glass and close the document
cover.
See also:
• "Making Copies From the Automatic Document Feeder (ADF)" on page 186
• "Making Copies From the Document Glass" on page 184
2
Press the (Scan) button.
3
Select Scan to E-Mail, and then press the
4
Select E-Mail to, and then press the
5
Select the setting listed below, and then press the
Keypad: Enter the e-mail address directly and then press the
Address Book: Select the e-mail address registered in the E-mail Address Book, and then
press the button.
E-Mail Group: Select the e-mail group registered in the E-mail Groups, and then press the
button.
Search Address Book: Enter a text to search from the E-mail Address Book, and then press
the button. Select the e-mail address from the list, and then press the
NOTE:
• E-mail recipients need to be registered before you can select Address Book on the operator panel.
6
Select scanning options as required.
7
Press the (Start) button to send e-mail.
button.
button.
button.
button.
button.
Scanning 237