Streaks Appear On The Output; Mottle - Fuji Xerox DocuPrint M255 z User Manual

Streaks Appear on the Output

If this trouble happens, contact our local representative office or authorized dealer.

Mottle

Problem
The printed result has mottled
appearance.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.
Action
Adjust the transfer bias.
1 Launch the Printer Setting Utility, click Adjust BTR on the Printer
Maintenance tab.
2 Adjust the setting for the type of print media being used.
3 Click the Apply New Settings button.
If you use non-recommended print media, use the print media
recommended for the printer.
Troubleshooting 365