• Initialize NVM
Purpose:
To initialize wired network data stored in Non-Volatile Memory (NVM). Enabling this feature and
rebooting the printer will reset all the wired network settings to their factory default values.
Values:
Yes
No*
*
Factory default menu setting
• PS Data Format
Purpose:
To set the PS data communications protocol. To make any changes effective, turn off the printer and
then turn it back on.
Values:
Auto*
Standard
BCP
TBCP
*
Factory default menu setting
Initializes the wired network data stored in NVM.
Does not initialize the wired network data stored in NVM.
Sets the PS data communications protocol automatically.
Sets the PS data communications protocol to Standard.
Sets the PS data communications protocol to BCP.
Sets the PS data communications protocol to TBCP.
Using the Operator Panel Menus and Keypad
297