Print Quality Problems - Fuji Xerox DocuPrint M255 z User Manual

Print Quality Problems

This section includes:
• "The Output Is Too Light" on page 362
• "Toner Smears or Print Comes Off/Stain on Back Side" on page 363
• "Random Spots/Blurred Images" on page 364
• "The Entire Output Is Blank" on page 364
• "Streaks Appear on the Output" on page 365
• "Mottle" on page 365
• "Ghosting" on page 366
• "Fog" on page 367
• "Bead-Carry-Out (BCO)" on page 367
• "Auger Mark" on page 368
• "Wrinkled/Stained Paper" on page 369
• "The Top Margin Is Incorrect" on page 370
• "Protrudent/Bumpy Paper" on page 370
NOTE:
• In this section, some procedures use the Printer Setting Utility or the SimpleMonitor. Some procedures that
use the Printer Setting Utility can also be performed using the operator panel.
See also:
• "Understanding the Operator Panel Menus" on page 282
• "Printer Setting Utility (Windows Only)" on page 52
• "SimpleMonitor (Windows Only)" on page 53
Troubleshooting 361