Turning On the Printer
IMPORTANT:
•
Do not use extension cords or power strips.
•
Do not connect the printer to an uninterruptible power supply (UPS) system.
1
Connect one end of the power cord to the power connector on the rear of the printer (see
View" on page
41).
2
Connect the other end to a power source.
3
Turn on the printer.
NOTE:
•
When you turn on the printer for the first time, follow the on-screen instructions on the LCD panel to
configure the initial settings of your printer.
See also:
• "Setting Initial Settings on the Operator Panel" on page 45
44
Basic Operation
"Rear