Fuji Xerox DocuPrint M255 z User Manual page 382

Error Code
031-585
031-587
031-588
031-589
031-594
031-598
033-503
033-513
033-517
033-518
033-519
033-787
033-788
034-700
034-701
034-702
034-703
034-704
034-705
034-706
034-707
382 Troubleshooting
What You Can Do
Press the button to clear the message. Check if the FTP server encounters any
delete/write-protection or disk problem.
Press the button to clear the message. Check if the FTP server encounters any
write-protection or disk problem.
Press the button to clear the message. Check if the storage location has free space.
Press the button to clear the message. Contact your server administrator to check if
the scanned file has wrong setting while being stored to FTP server. If this does not
solve the problem, contact our local representative office or authorized dealer.
See also:
• "Online Services" on page 417
Press the button to clear the message. Check if the FTP server encounters any
write-protection or disk problem.
Press the button to clear the message. Retry, and check the report. Delete the
unnecessary data stored in the memory.
Press the button to clear the message. Check if the password of the fax lock is cor-
rect.
Press the button to clear the message. Check if your region is set correctly.
Fax service is locked. To continue, press the
See also:
• "Limiting Access to Copy, Fax, Scan, and USB Direct Print Operations" on page 333
Press the button to clear the message. The job is cancelled.
Press the button to clear the message. Remove the received fax, or wait for a while
until sending a fax is completed.
Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
•Check if the phone line is connected properly.
•Check if the destination number is correct.
•Set Number of Redial to the largest value.
•Set Interval Timer or Redial Delay longer.
See also:
• "Connecting the Telephone Line" on page 244
Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
•Check if the phone line is connected properly.
•Check if the destination number is available and correct.
•Set Number of Redial to the largest value.
•Set Interval Timer or Redial Delay longer.
See also:
• "Connecting the Telephone Line" on page 244
Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
•Set Number of Redial to the largest value.
•Set Interval Timer or Redial Delay longer.
•Lower Modem Speed.
button and disable the fax lock.