Delayed Start - Fuji Xerox DocuPrint M355 df User Manual

• Resolution
Purpose:
To specify the scan resolution to improve the output quality.
Values:
*
Standard
Fine
Super Fine
Photo
NOTE:
• Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the receiving device.
• 2-Sided
Purpose:
To scan both sides of a sheet of paper.
Values:
*
1-Sided
2-Sided
2-Sided Binding Short
• Lighten/Darken
Purpose:
To adjust the density to make the copy lighter or darker than the original.
Values:
Darker3
Darker2
Darker1
*
Normal
Lighter1
Lighter2
Lighter3

• Delayed Start

Purpose:
This feature enables you to set a specific time for the fax transmission to start. Once Delayed Start mode is
activated, your printer stores all of the documents to be faxed into its memory and sends them at the specified time.
After faxing in the Delayed Start mode is complete, the data in the memory is cleared.
Values:
21:00*/9:00PM*
0:00 – 23:59 /
1:00 – 12:59AM/PM
NOTE:
• A maximum of 19 delayed fax jobs can be stored in this printer.
300
Using the Operator Panel Menus and Keypad
Suitable for documents with normal sized characters.
Suitable for documents containing small characters or thin lines or
documents printed using a dot-matrix printer.
Suitable for documents containing extremely fine detail. The Super
Fine mode is enabled only if the remote machine also supports the
Super Fine mode. See the notes below.
Suitable for documents containing photographic images.
Scans one side of a document.
Scans both sides of a document.
Scans both sides of a document to be bound by short edge.
Works well with light print or faint pencil markings.
Works well with standard typed or printed documents.
Works well with dark print.
Specify the fax transmission start time when sending a fax at a
specified time.