Using The Wia Driver - Fuji Xerox DocuPrint M255 z User Manual

Using the WIA Driver

Your printer also supports the Windows Image Acquisition (WIA) driver for scanning images. WIA is
one of the standard components provided with Windows XP and later operating systems and works
with digital cameras and scanners. Unlike the TWAIN driver, the WIA driver allows you to scan an
image and easily manipulate it without using additional software.
The following procedure uses Windows 7 as an example.
NOTE:
• Ensure that the printer is connected to the computer using the USB cable.
1
Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going
in first; or place a single document face down on the document glass and close the document
cover.
See also:
• "Making Copies From the Automatic Document Feeder (ADF)" on page 186
• "Making Copies From the Document Glass" on page 184
2
Start the drawing software, such as the Paint.
NOTE:
• On Windows Vista, use the Windows Photo Gallery instead of the Paint.
3
Click the Paint button → From scanner or camera.
The WIA window appears.
4
Select your scanning preferences and click Adjust the quality of the scanned picture to
display the Advanced Properties dialog box.
5
Select the desired properties including brightness and contrast, and then click OK.
6
Click Scan to start scanning.
7
Click the Paint button → Save as.
8
Enter a picture name, and select a file format and destination to save the picture.
212 Scanning