Assigning An Ip Address (For Ipv4 Mode) - Fuji Xerox DocuPrint M255 z User Manual

Assigning an IP Address (for IPv4 Mode)

NOTE:
• When you assign an IP address manually in IPv6 mode, use the CentreWare Internet Services. To display the
CentreWare Internet Services, use the link local address. To check a link local address, see
Checking the System Settings Page" on page
• Assigning an IP address is considered as an advanced function and is normally done by a system
administrator.
• Depending on the address class, the range of the IP address assigned may be different. On Class A, for
example, an IP address in the range from 0.0.0.0 to 127.255.255.255 will be assigned. For assignment
of IP addresses, contact your system administrator.
You can assign the IP address by using the operator panel or the Printer Setting Utility.
Using the Operator Panel
1
Turn on the printer.
Ensure that the LCD panel shows Select Function.
2
On the operator panel, press the
3
Select Admin Menu, and then press the
4
Select Network, and then press the
5
Select TCP/IP, and then press the
6
Select IPv4, and then press the
7
Select Get IP Address, and then press the
8
Select Panel, and then press the
9
Press the (Back) button, and then ensure that Get IP Address is selected.
10
Select IP Address, and then press the
11
Enter the value of the IP address using the numeric keypad.
12
Press the button.
13 11
Repeat steps
14
Press the (Back) button, and then ensure that IP Address is selected.
15
Select Subnet Mask, and then press the
16
Enter the value of the subnet mask using the numeric keypad.
17
Press the button.
18 16
Repeat steps
19
Press the (Back) button, and then ensure that Subnet Mask is selected.
20
Select Gateway Address, and then press the
(System) button.
button.
button.
12
and to enter all of the digits in the IP address, and then press the
17
and to set subnet mask, and then press the
71.
button.
button.
button.
button.
button.
button.
button.
Printer Connection and Software Installation
"Printing and
button.
button.
69