Automatic Document Feeder (ADF) Guidelines
The ADF can accommodate the paper of the following sizes:
•
Width: 148–215.9 mm (5.83–8.50 inches)
•
Length: 210–355.6 mm (8.27–14.00 inches)
The supported paper weight ranges from 60 to 105 gsm.
Follow the guidelines below when loading source documents into the ADF:
•
Load documents face up so that the top of the document enters the printer first.
•
Place only loose sheets of paper in the ADF.
•
Adjust the document guides so that they fit against the documents.
•
Insert paper in the document feeder tray only when the ink on the paper is completely dry.
•
Do not load documents above the MAX fill line. You can load up to 50 sheets of 64 gsm
documents.
NOTE:
•
You cannot load the following documents on the ADF. Be sure to place them on the document glass.
Curled documents
Lightweight documents
Cut and paste documents
Pre-punched paper
Folded, creased or torn documents
Carbon paper
Printing Basics
133