Panel Lock Feature
This feature prevents unauthorized users from changing the settings on the operator panel made by
the administrator. However, you can modify the settings for individual print jobs using the print driver.
This section includes:
• "Enabling the Panel Lock Feature" on page 331
• "Disabling the Panel Lock Feature" on page 332
Enabling the Panel Lock Feature
1
Press the
(System) button.
2
Select Admin Menu, and then press the
3
Select Secure Settings, and then press the
4
Select Panel Lock, and then press the
5
Select Panel Lock Set, and then press the
6
Select Enable, and then press the
7
If necessary, select Change Password, and then press the
8
Enter a new password, and then press the
NOTE:
•
The factory-default panel password is 0000.
NOTE:
•
Be sure to remember the password. The procedure described below allows you to reset the password.
However, the settings for the Address Book are cleared.
1
Turn off the printer. Then, while holding the
•
If you want to change the password while Panel Lock Set is Enable, perform steps
current password, and then press the
then press the
button. Enter a new password, and then press the
password.
button.
button.
button.
button.
button.
button.
(System) button, turn on the printer.
button. Perform steps
3
Using the Operator Panel Menus and Keypad
button.
1
and 4. Select Change Password, and
button. This will change the
and 2. Enter the
331