Understanding Printer Messages - Fuji Xerox DocuPrint M255 z User Manual

Understanding Printer Messages

The printer's LCD panel displays a message describing the current state of the printer or indicates a
possible printer problem you must resolve. This section describes error codes included in the
messages, their meanings, and how to clear the messages.
IMPORTANT:
• When an error message is displayed, the print data remaining on the printer and the information accumulated
in the memory of the printer are not secured.
Error Code
005-121
005-301
010-397
016-315
016-317
016-372
016-501
016-502
016-503
016-504
016-506
016-507
016-718
016-719
016-720
016-744
016-745
016-749
016-753
016-755
016-764
016-766
What You Can Do
Open the ADF cover. Remove the jammed paper and then close the ADF cover.
See also:
• "Clearing Paper Jams From the Automatic Document Feeder (ADF)" on page 343
Close the ADF cover.
Turn off the printer, and then on. If this does not solve the problem, contact our local
representative office or authorized dealer.
See also:
• "Online Services" on page 417
Press the button to clear the message. Check if the SMTP server setting is correct
by contacting your server administrator.
Press the button to clear the message. Check if the user name and password for the
POP3 server are set correctly by contacting your server administrator.
Press the button to clear the message. Check if the SMTP server address and e-
mail destination are set correctly.
Press the button to clear the message. Check if the user name and password used
for the SMTP server are set correctly by contacting your server administrator.
Press the button to clear the message. Retry when the printer does not process any
job.
Press the button to cancel the current job. Retry when the printer does not process
any job.
Press the button to clear the message. If this does not solve the problem, contact our
local representative office or authorized dealer.
See also:
• "Online Services" on page 417
Press the button to cancel the current job. Retry when the printer does not process
any job.
Press the button to cancel the current job. Retry when the printer does not process
any job.
Press the button to clear the message. Check if the Ethernet cable is properly con-
nected. If this does not solve the problem, contact SMTP server administrator.
Press the button to clear the message. Check if the server or the computer is
available by pinging the IP address. If this does not solve the problem, contact your
server administrator.
Troubleshooting 379