Fuji Xerox DocuPrint M255 z User Manual page 380

Error Code
016-767
016-791
016-795
016-797
016-920
016-930
016-931
016-981
016-985
017-970
017-980
017-981
017-988
018-338
024-340
024-360
024-371
024-958
024-963
024-969
026-720
026-721
026-722
026-723
026-750
380 Troubleshooting
What You Can Do
Press the button to clear the message. Check if the recipient address is correct, and
try scanning again.
Insert the USB memory device and press the
Press the button to clear the message. Check if the format of a file stored in USB
memory device is supported, or the file is not broken.
Press the button to clear the message. Check the wireless settings for the access
point and the printer.
Remove the device from the front USB port and press the
sage.
Press the button to cancel the current job. Try copying fewer documents.
Attached file size is larger than you defined. Press the
Try the following:
•Enlarge Max E-Mail Size.
•Lower the resolution setting.
•Change the file format of the scanned image.
Memory is likely to be full. Press the
•Delete the data stored in the memory.
•Lower the resolution setting.
•Reduce the number of pages.
Press the button to clear the message. Retry when the printer does not process any
job.
Press the button to clear the message. Check if the interface cable is securely con-
nected or your computer does not have any problem.
Turn off the printer, and then on. If this does not solve the problem, contact our local
representative office or authorized dealer.
See also:
• "Online Services" on page 417
Load the specified paper and press the
screen instruction if one appears.
See also:
• "Loading Print Media in the Paper Tray" on page 144
• "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 152
Load the specified paper and press the
See also:
• "Loading Print Media in the Paper Tray" on page 144
• "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 152
Press the button to clear the message. Check if the USB memory device has
enough memory.
Press the button to clear the message. Check if the USB memory device is write-pro-
tected or gets any disk problem.
Press the button to clear the message. Check if the path and file name to save the
data is too long.
Press the button to clear the message. Check if the interface cable is securely con-
nected, or restart the application you use.
button to clear the message.
button to clear the mes-
button to clear the message.
button to clear the message. Try the following:
button to clear the message. Follow the on-
button to clear the message.