Toner Refresh; Initialize Nvm - Fuji Xerox DocuPrint M255 z User Manual

• Toner Refresh

Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in
a new toner cartridge.
Values:
Black
* Factory default menu setting
• Machine life
Purpose:
To specify whether to continue print operations when the printer comes to the end of its service life.
Values:
Stop Print*
Continue Print
* Factory default menu setting
NOTE:
• When the printer no longer operates showing the error code 191-310 on the LCD panel, press the
button and the button at the same time and change the Machine life setting to Continue Print.
Then, you can keep using the printer.
• Although you can keep using the printer after the end of its service life by changing the setting to Continue
Print, the printing quality is not guaranteed.

• Initialize NVM

Purpose:
To initialize the NVM for the printer settings, the Phone Book data for fax, and the Address Book data
for scan. Enabling this feature and rebooting the printer will reset all the printer settings and all the
Phone Book (fax) and Address Book (scan) data to their factory default values.
See also:
• "Resetting to Factory Defaults" on page 335
Values:
User Fax
Section
User Scan
Section
System Section
* Factory default menu setting
312 Using the Operator Panel Menus and Keypad
Cleans the toner in the toner cartridge.
Yes
Does not clean the toner in the toner cartridge.
No*
Stops print operations at the end of service life.
Continues print operations after the end of service life.
Initializes the Speed Dial and Group Dial entries in the Phone
Yes
Book.
Does not initialize the Speed Dial and Group Dial entries in the
No*
Phone Book.
Initializes the e-mail and server address entries in the Address
Yes
Book.
Does not initialize the e-mail and server address entries in the
No*
Address Book.
Initializes the printer settings.
Yes
Does not initialize the printer settings.
No*
(Back)