Initialize Nvm - Fuji Xerox DocuPrint CM115 w User Manual

Internet Services Disable
Bonjour(mDNS)
*2
HTTP-SSL/TLS
SNTP
*1
To add a printer using an IPP port on Windows
For example: http:// [Printer's IP address]:631/ipp
*2
HTTP-SSL/TLS is available only when a digital certificate is created using CentreWare Internet Services. For details about creating
a digital certificate, see the Help on the CentreWare Internet Services.
NOTE:
• This item is displayed only when Wi-Fi is set to On.
• IP Filter
NOTE:
• This item is displayed only when Wi-Fi is set to On.
• The IP Filter feature is supported for IPv4 addresses and available only for LPD or Port 9100.
Purpose:
To block data received from certain IP addresses through the network. You can set up to five IP addresses.
Values:
No.n/Address
(n is 1 – 5.)
No.n/Mask
(n is 1 – 5.)
No.n/Mode
(n is 1 – 5.)

• Initialize NVM

Purpose:
To initialize the network settings stored in the NVM (non-volatile memory). After executing this function and
rebooting the printer, all network settings are reset to their default values.
Values:
Yes
No*
• Wi-Fi
Purpose:
To enable the wireless connection.
Values:
Off
On*
NOTE:
• When you use the USB connection and do not use the wireless connection, you need to disable Wi-Fi.
Disables an access to the CentreWare Internet Services embedded in the printer.
Enables an access to the CentreWare Internet Services embedded in the printer.
Enable*
Disables the Bonjour (mDNS).
Disable
Enables the Bonjour (mDNS).
Enable*
Disables HTTP-SSL/TLS.
Disable*
Enables HTTP-SSL/TLS.
Enable
Disables SNTP.
Disable*
Enables SNTP.
Enable
®
, insert port number "631" in the URL of the printer.
Sets the IP address for Filter n.
Sets the address mask for Filter n.
Rejects an access from the specified IP address.
Reject
Accepts an access from the specified IP address.
Accept
Disables the IP Filter feature for Filter n.
Off*
Using the Operator Panel Menus and Keypad 169