Power Source; Switching The Power On; Making The Initial Settings; Switching The Power Off - Fuji Xerox ApeosPort-VII CP4421 User Manual

2 Setup

Power Source

Switching the Power On

1
Press the Power button to switch the power on.
Note

If the device does not power on, check that the power cable is plugged in.

Making the Initial Settings

An initial setup wizard appears after the device is switched on for the first time.
Set necessary information and tap [Next] on each screen. Follow the displayed instruction.
When [Device Setup Complete] appears, tap [Finished].
Note
 For details on the settings, see the descriptions for each item. The items set by the initial setup wizard can be
changed anytime.

Switching the Power Off

1
Before switching the power off, make sure that the device has completed all print jobs.
Then, make sure that the Data LED does not blink.
Important
 Do not switch the power off in the following situations. If the power is switched off, the processing data may
be erased.
 While data is being received
 While a job is being printed

When switching the power off, wait 5 seconds after outputs have been delivered.
28