Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1505

PIM Commands
•
The interface configured as a stub will not send any IPv6 PIM packets through that interface, and any
received IPv6 PIM packets are also ignored. By default, an IPv6 PIM interface is not set to be a stub
one.
•
The IPv6 PIM graft-retry-interval and prune-limit-interval options can be used only with the IPv6
PIM-DM mode.
Examples
-> ipv6 pim interface vlan-2 hello-interval 100 triggered-hello 10 joinprune-inter-
val 100 hello-holdtime 350 joinprune-holdtime 400
-> no ipv6 pim interface vlan-2
Release History
Release 7.1.1; command was introduced.
Related Command
show ipv6 pim interface
MIB Objects
alaPimInterfaceTable
alaPimInterfaceIfIndex
alaPimInterfaceStatus
alaPimInterfaceHelloInterval
alaPimInterfaceTrigHelloInterval
alaPimInterfaceJoinPruneInterval
alaPimInterfaceHelloHoldtime
alaPimInterfaceJoinPruneHoldtime
alaPimInterfacePropagationDelay
alaPimInterfaceOverrideInterval
alaPimInerfaceDRPriority
alaPimInterfaceStubInterface
alaPimInterfacePruneLimitInterval
alaPimInterfaceGraftRetryInterval
OmniSwitch CLI Reference Guide
Displays detailed IPv6 PIM settings for a specific interface.
March 2011
ipv6 pim interface
page 23-91