Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1525

PIM Commands
SSM ff33::/32
output definitions
Origin
Group Address/Prefix Length The IPv6 multicast group address along with the prefix length.
RP Address
Mode
Mapping Precedence
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 pim static-rp
ipv6 pim ssm group
ipv6 pim dense group
MIB Objects
alaPimGroupMappingTable
alaPimGroupMappingOrigin
alaPimGroupMappingGrpAddress
alaPimGroupMappingGrpPrefixLength
alaPimGroupMappingRPAddress
alaPimGroupMappingPimMode
alaPimGroupMappingPrecedence
OmniSwitch CLI Reference Guide
The mechanism by which the PIM mode and RP for the group
were learned. The possible values include 'static RP' for local static RP
configuration, 'static SSM' for both static SSM group configuration and
Dense Mode Group configuration, and 'BSR' for the PIM Bootstrap
Router mechanism.
The IPv6 address of the Rendezvous Point to be used for groups within
the group prefix.
The IPv6 PIM mode to be used for groups in this prefix.
The precedence value of a particular row, that determines which row
applies to a given group address. Numerically higher values for this
object indicate lower precedences, with the value zero denoting the
highest precedence.
Adds, modifies, or deletes a static RP for an IPv6 multicast group
("modifies" applies only to the RP address, since the table is indexed
from group address and prefix length parameters).
Statically maps the specified IPv6 multicast group(s) to the PIM Source
Specific Multicast mode (SSM).
Statically maps the specified IPv6 multicast group(s) to the PIM Dense
mode (DM).
March 2011
show ipv6 pim group-map
ssm
page 23-111