Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1538

show ipv6 pim sgroute
output definitions (continued)
RPF Route Metric
DR Register State
DR Register Stop Timer
Upstream Prune State
Upstream Prune Limit Timer
Originator State
Source Active Timer
State Refresh Timer
Interface Name
Uptime
Local Membership
Join Prune State
Prune Pending Timer
Join Expiry Timer
Assert State
Assert Timer
Assert Winner
Assert Winner Metric Pref
Assert Winner Metric Metric
page 23-124
The metric preference of the route used to find the RPF interface
towards the source.
Whether the local router should encapsulate (S,G) data packets in Reg-
ister messages and send them to the RP. The possible values include
No Info, Join, Join Pending, or Prune.
The value of the Register Stop Timer. If the Register State is 'prune',
this is the time remaining before the local router sends a Null-Register
message to the RP. If the State is 'joinPending', this is the time remain-
ing before the local router resumes encapsulating data packets and
sending them to the RP.
Whether the local router has pruned itself from the tree. This is only
used by PIM-DM. The possible values include forwarding, Ack Pend-
ing, or Pruned.
The time remaining before the local router may send a (S,G) prune
message on alaPimSGRPFIfIndex. This is only used by PIM-DM.
Whether this router is an originator for the (S,G) message flow. This is
only used by PIM-DM. The possible values include Not Originator or
Originator.
If this router is the Originator, this is the time remaining before the local
router reverts to notOriginator state. Otherwise, this is zero. This is
only used by PIM-DM.
If Originator state is 'originator', this is the time remaining before the
local router sends a State Refresh Message. Otherwise, this is zero.
This is only used by PIM-DM.
The interface name corresponding to the ifIndex that corresponds to
this entry.
The time since this entry was created.
Whether the local router has (S,G) local membership on this interface.
The state resulting from (S,G) Join/Prune messages received on this
interface. The possible values include No Info, Join, or Prune Pending.
The time remaining before the local router acts on an (S,G) Prune mes-
sage received on this interface, during which the router is waiting to see
whether another downstream router will override the Prune message.
The time remaining before (S,G) Join state for this interface expires.
The (S,G) Assert state for this interface. The possible values include
No Info, Winner, or Loser.
If Assert State is Winner, this is the time remaining before the local
router sends a (S,G) Assert message on this interface. If the Assert
State is Loser, this is the time remaining before the (S,G) Assert state
expires.
If the Assert State is Loser, this is the address of the assert winner.
If the Assert State is Loser, this is the metric preference of the route to
the source advertised by the assert winner.
If the Assert State is Loser, this is the routing metric of the route to the
source advertised by the assert winner.
OmniSwitch CLI Reference Guide
PIM Commands
March 2011